company news about How Does Glass Glue Negotiate with Storms at An Altitude of 300 Meters?

On the exterior walls of a 300 meter skyscraper, storms never give up. It carries the "chips" of hurricanes, heavy rains, and drastic temperature changes with speeds of up to 100 kilometers per hour, attempting to tear every crack in the building's curtain wall.

And glass glue, this seemingly small sealing material, has become the "negotiation expert" between architecture and storms - it uses flexible wisdom to resolve rigid impacts, and uses resilience to maintain the survival of the structure. This' negotiation 'has no compromise, only the ultimate game of materials science.

When the wind speed reaches 30m/s, the pressure per square meter on the surface of the curtain wall exceeds 1 ton. The adhesive layer of glass glue must stretch and contract like a spring, absorbing dynamic loads while maintaining the stability of molecular chains.

Under extreme temperature differences, the difference in thermal expansion coefficient between metal frames and glass can reach up to 4 times. Glass glue must resist both the "pulling" caused by cold shrinkage and the "squeezing" caused by thermal expansion to avoid interface failure caused by stress concentration.

At an altitude of 300 meters, glass glue cannot directly negotiate with storms, but its storm resistance can be improved through scientific material selection, optimized construction, and structural reinforcement. The following are specific strategies:

PART.01 "Negotiator" | Performance of Glass Adhesive

01 Weather resistance priority

Due to the large temperature difference and strong ultraviolet radiation in high-altitude environments, it is necessary to use silicone adhesive with strong weather resistance to maintain stability in extreme environments and prevent aging and cracking.

02 High viscosity guarantee

Choose products with long-lasting viscosity and high strength after curing to ensure a tight fit between the glass and window frame, avoiding the expansion of gaps caused by wind pressure.

03 Elastic adaptation

Glass may undergo minor deformation during storms and requires good elasticity to cushion stress and prevent tearing.

PART.02 "Negotiation Strategy" | Improvement of Construction Technology

01 Upgrading of bonding process

The colloid needs to extend to the outer edge of the window frame to provide additional fixing points and enhance overall stability.

02 Environmental Control

Avoid high temperature and high humidity environments during construction to ensure complete solidification of the colloid. Clean the surface of glass and window frames, remove oil and dust, and enhance adhesion.

03 Thickness and uniformity

The thickness of the colloid should be moderate. If it is too thin, it is easy to tear, and if it is too thick, it will solidify slowly and crack easily. Use a professional glue gun to evenly apply glue, avoiding bubbles and fractures.

PART.03 "Negotiation chips" | Structural reinforcement and auxiliary measures

01 Glass reinforcement

Using tempered glass or double-layer glass, its impact strength is 5 times that of ordinary glass, reducing the risk of breakage.

02 Window frame reinforcement

The connection between the window frame and the wall should be firm, fixed with expansion bolts or chemical anchor bolts to prevent overall loosening. The window frame material is made of high-strength aluminum alloy or stainless steel, which has strong deformation resistance.

03 Protection layer stacking

Install windproof nets or impact resistant films on the outer layer of the glass to further disperse wind and reduce direct impact.

PART.04 "Emergency Mechanism" | Regular Inspection and Maintenance

01 Regular inspection

Check the condition of the glass adhesive every six months and observe for signs of cracking, peeling, or aging. Check if the connection between the glass and the window frame is loose, and promptly repair or reinforce it.

02 Aging replacement

The service life of glass adhesive is usually 5-10 years, and it needs to be replaced as a whole after expiration to avoid performance degradation. Choose high-quality products when replacing to ensure adhesion.

03 Extreme Weather Plan

Before the arrival of a typhoon or sandstorm, check the condition of the glass adhesive and reinforce it if necessary. Clean up the debris on the glass surface after the storm to avoid long-term accumulation and damage to the gel.