|
|
| 브랜드 이름: | CSJ |
| 모델 번호: | 903 |
| MOQ: | 100 상자 (샘플 주문 후) |
| 지불 조건: | 티/티 |
1. One-component, neutral curing silicone for structural applications.
2. Non-corrosive characteristics ensure safety for all surfaces.
3. Strong tolerance against UV light, heat, and moisture.
4. Works effectively in temperatures from -50°C to 180°C after full cure.
5. Supports 25% movement capability in dynamic joints.
1. For curtain wall glazing in aluminum, terracotta and high-rise architecture.
2. Panel system structural installation.
3. Other industrial architectural sealant applications.
Specification:
Operating conditions of 23±2°C and 50±5%RH, then test:
|
No. |
Property |
Standards |
Results |
|
|
1 |
Type |
/ |
OXIEM |
|
|
2 |
Density |
g/cm³ |
1.43 |
|
|
3 |
Tack-Free Time / H |
≤3 |
≤1 |
|
|
4 |
Extrusion Rate (ml/min) |
≥150 |
≥250 |
|
|
5 |
Shore A Hardness |
20~60 |
40~50 |
|
|
6 |
Elastic recovery rate (%) |
≥80 |
≥90 |
|
|
7 |
Tensile Modulus (MPa) |
23°C |
≥0.6 |
≥0.8 |
|
8 |
-20°C |
≥0.6 |
≥0.8 |
|
|
9 |
Constant Elongation Bonding |
Non-Destructive |
Meet The Standards |
|
|
10 |
Constant Elongation After Immersion |
Non-Destructive |
Meet The Standards |
|
|
11 |
Adhesion After Immersion in Water and Light |
Non-Destructive |
Meet The Standards |
|
Typical property data values should not be used as specifications. Assistance with specifications Are available by contacting us.
FAQ:
Q1. Can I have a sample order for the Silicone sealant?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: 2-3 days for Sample preparing ,5-7 working days for mass production.
Q3. Do you have any MOQ limit for silicone sealant?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Mass production will be shipped by sea. Sample order will be shipped by FedEx or other international express.
Q5. How to proceed an order for silicone sealant?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on silicone sealant product?
A: Yes. Please inform us formally before our production.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 35 years warranty to our products.
